Filter
Top Products
Model G0440/G0441 (Mfg. Since 03/12)
-35-
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
SECTION 5: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, trade maga-
zines, or get formal training before begin-
ning any projects. Regardless of the con-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning
any operations.
Loose hair, clothing, or
jewelry could get caught
in machinery and cause
serious personal injury.
Keep these items away
from moving parts at all
times to reduce this risk.
Remote Control
The remote control for the Model G0440/G0441
is IR (infrared) rather than RF (radio frequency) to
prevent accidental startups by other common RF
items, such as garage door openers.
Because this remote system is IR, you must point
the remote control directly at the switch to make
it operate.
If you plan on placing your dust collector in a dif-
ferent room or outside of your shop, you must
mount the switch in the shop and wire it through
the wall to the dust collector to make use of the
remote control.
Operating the Model G0440/G0441 is simple and
straightforward. Turn the dust collector ON, then
turn the machine ON. When you are finished with
the machine operation, turn the machine OFF,
then turn the dust collector OFF.
Blast gates can be used at the start of each branch
line to control the air flow from the woodworking
machine to the dust collector. If a machine is not
being used, keep the blast gate closed to maintain
higher levels of efficiency throughout the system.
General