Filter
Top Products
-28-
G0508 10 HP Industrial Dust Collector
SECTION 6: OPERATIONS
DO NOT use the dust collector for any
other purpose besides collecting dust from
connected woodworking machines. A dust
collector should NEVER be used as a shop
vacuum. For safest use, wear a respirator
and use an air cleaner in addition to the
dust collector.
All dust collectors dis-
perse fine dust which may
cause allergic reactions
or respiratory problems.
Always wear a respirator
when operating your dust
collector.
Wear safety glasses
whenever starting or
using machine. Failure
to comply may result in
serious personal injury.
Do NOT put hands or
small objects near inlet
openings during opera-
tion. Objects sucked
into the inlet will meet
with the impeller blade.
Failure to heed this
warning could result in
property damage or per-
sonal injury.
General
Operating your Model G0508 is simple and
straightforward. Blast gates located at each of the
machines controls the air flow from the woodwork-
ing machine to the dust collector. If a machine is
not being used, keep the blast gate closed to
maintain higher levels of efficiency throughout the
system.