Filter
Top Products
-24- G0518 Drum / Flap Sander
SECTION 7: MAINTENANCE
Regular periodic maintenance on your Model
G0518 will ensure its optimum performance.
Make a habit of inspecting your machine each
time you use it.
Before each use, perform the following
checks:
• Tighten loose fasteners and hardware.
• Make sure the ON/OFF switch functions cor-
rectly. If it is not functioning correctly, replace
it. DO NOT try to repair a malfunctioning
switch.
• Remove accumulations of sawdust from the
machine to allow adequate heat dissipation.
• Replace worn or damaged sanding sleeves,
sanding flaps, and sanding brushes.
• Correct any other condition that could inhibit
the safe operation of this machine.
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
rolled up and long hair
tied up and away from
machinery.
Projectiles from the
machine could cause
serious eye injury.
Wear safety glasses at
all times.
Serious personal injury
could occur if you con-
nect your machine to the
power source during the
maintenance process.
DO NOT connect the
machine to the power
source while performing
any maintenance on the
Model H3118.
!
GeneralMaintenance Safety
Your safety is important! Please follow the
warnings below during this entire section: