Filter
Top Products
-26- G0518 Drum / Flap Sander
Figure 27. G0518 Wiring.
Figure 28. G0518 110V wiring.
Figure 29. G0518 220V wiring.
Changing Motor
Voltage
The Model G0518 comes from the factory
prewired to operate at 110V. The motor can also
be wired to operate at 220V. Before changing the
running voltage to 220V, review Page 7 and
make sure you have a suitable 220V power
source.
To change the running voltage:
1. Unplug the machine from the power
source!
2. Remove the 4 bolts that secure the motor
assembly to the stand.
3. Carefully lift the motor assembly from the
stand and lay it on its side to reveal the elec-
trical wires shown in Figure 27.
4. Follow the wiring diagram in Figure 28 to
wire the Model G0518 for 110V.
5. Follow the wiring diagram in Figure 29 to
wire the Model G0518 for 220V.
6. Re-assemble the machine when finished.
!