Filter
Top Products
G0529 Oscillating Spindle & Disc Sander -21-
Serious personal injury
could occur if you con-
nect your machine to the
power source during the
maintenance process.
DO NOT connect the
machine to the power
source while performing
any maintenance on this
machine.
!
Your safety is important! Please follow the
warnings below during this entire section:
Check for the following conditions before you
use the sander:
• Loose table bolts.
• Worn or damaged sanding discs or
sleeves.
• Worn or damaged wires.
• Any other condition that could hamper
the safe operation of this machine.
Perform the following tasks at the scheduled
time intervals:
After Each Use
• Wipe off the sawdust build-up from
the table surface.
• Turn off power switch and remove the
switch key.
• Check for spindle straightness.
Weekly
• Wipe a lubricant such as SLIPIT
®
onto
the table.
• All the bearings are permanently lubri-
cated and require no further lubrica-
tion
Long-Term Storage
• Keep unpainted surfaces rust free
with products such as Boeshield
®
T-9.
ScheduleMaintenance Safety
SECTION 7: MAINTENANCE