Filter
Top Products
G0605X/G0606X Extreme Series 12" Table Saw
-13-
In the event of an electrical short, grounding
reduces the risk of electric shock. The ground
-
ing wire in the power cord must be properly
connected to the grounding prong on the plug;
likewise, the outlet must be properly installed and
grounded. All electrical connections must comply
with local codes and ordinances.
Grounding
Figure 4. Power shut-off switch.
We do not recommend the use of extension
cords. Instead, arrange the placement of your
equipment and the installed wiring to eliminate
the need for extension cords.
If you find it absolutely necessary to use an exten
-
sion cord with your machine, the extension cord
must also contain a ground wire and plug pin.
220V Operation
Use at least a 10 gauge cord that does not exceed
50 feet in length!
440V Operation
Do not use an extension cord with 440V!
Extension Cords