Filter
Top Products
Model G0632 (Mfg. 4/12+)
-37-
SECTION 5: ACCESSORIES
ACCESSORIES
G1194—3-Jaw Chuck
A "must have" for the serious wood turner. This
3-jaw chuck is a self-centering style chuck used
mostly for round work. All three jaws tighten
together at the same time. Jaws are reversible for
expanded work holding capacity. Threaded insert
required for mounting!
Figure 51. Model G1194 3-Jaw Chuck.
G1082—4-Jaw Chuck
Another "must have" for the serious wood turner.
This 4-jaw chuck is an independent type chuck
that is used for square and odd-shaped pieces.
Each jaw tightens individually and can be turned
around to hold larger dimension workpieces.
Threaded insert required for mounting!
Figure 52. Model G1082 4-Jaw Chuck.
Figure 54. Robert Sorby Stebcentre.
H5954—Robert Sorby Stebcentre MT#2
Razor sharp teeth bite into the workpiece for
secure operation and the spring loaded center
point controls the amount of drive or slip. This pat-
ented feature helps avoid the problem of ‘dig-in’.
Production turners can also load and unload their
work while the lathe is still running!
G3167—1
1
⁄4" x 8 TPI RH Threaded Insert
This threaded insert is required to mount a 3- or
4-jaw chuck to your wood lathe.
T10117—Big Mouth Dust Hood with Stand
Capture dust from any machine operation with
this Big Mouth Dust Hood. Simply attach a 4" dust
collection hose and adjust the hood right where
you need it. The free standing base eliminates
complicated machine set-ups and the tilting 16
3
⁄8"
x 12
7
⁄8" hood adjusts from 23" to 43" high. Every
shop needs one of these!
Figure 53. T10117 Big Mouth Dust Hood.