Filter
Top Products
Moving & Placing
Table Saw
Figure 8.
4.
5.
Note:There are three options for leveling the
saw: 1) Place it on a mobile base (Grizzly
Model G7315Z) and use the mobile base
adjustable feet to level it, 2) shim under the
cabinet, and 3) thread bolts down into the
nuts that are welded on the inside stand cor-
ners (see Figure 9).
Figure 9.
DO NOT lift the table saw any higher than
necessary to clear the floor. Serious per-
sonal injury and damage to the machine
may occur if safe moving methods are not
followed.
This machine and its
components are heavy.
Serious injury may occur
if safe moving methods
are not followed.
Get help when lifting or
moving the machine and
its components. Use a
forklift to reduce the
risk of a lifting strain or
crushing injury.
Page 56
To remove the saw from the pallet:
1.
2.
Figure 8
3.