Filter
Top Products
Zero-Clearance
Insert
Figure 92.
4.
5.
6.
Figure 93
If you must use this saw to cut the dimen-
sions of the zero-clearance insert you will
fabricate in these instructions, make sure
you DO NOT make any cuts while the
included table insert is removed. THIS IS
DANGEROUS. You must re-install the table
insert, reassemble all saw components, and
remove all tools before cutting.
Items Needed Qty
To make a zero-clearance table insert, do
these steps:
1.
2.
Figure 93.
3.
Figure 92
7.
8.