Filter
Top Products
-4-
Model G0756 (Mfg. Since 2/13)
Control Panel
A. Spindle Speed Levers: Used to get spindle
speed at available RPMs.
B. Coolant Pump Switch: Turns pump on,
sending coolant to nozzle
C. High/Low Spindle Speed Range Switch:
Selects high/low range for spindle speed.
D. Spindle Rotation Switch: Controls direction.
E. Spindle Stop Button: Stops all work.
F. Working Lamp Switch: Turns work light on
or off.
G. EMERGENCY STOP Button: Immediately
cuts power to motor and control panel when
pressed. Remains depressed until button is
reset by twisting clockwise.
H. Drilling/Tapping Switch: Selects between
drilling and tapping modes.
I. Spindle Start Button: Starts machine when
Master Power Switch has already been
turned to the ON position and the high/low
spindle speed range switch is turned to 1 or
2.
Figure 1. Control panel
A
B
C
D
E
F
G
H
I