Grizzly G1022PRO Saw User Manual


 
G1022 Series Contractor Saws -13-
Unpacking
If moving this machine
up or down stairs, the
machine must be dis-
mantled and moved in
smaller pieces. Make
sure floor and stair
structures are capable of
supporting the com-
bined weight of the
machine parts and the
people moving them.
The Model G1022 Series is shipped from the
manufacturer in a carefully packed carton. If you
discover the machine is damaged after you have
signed for delivery, immediately call Customer
Service for advice.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
The Model G1022 Series
represents a heavy load.
Seek assistance before
beginning assembly.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
Piece Inventory
After all the parts have been removed from the car-
ton, you should have:
1. Stand Components
2. Extension Wings (2)
3. V-Belt
4. Motor with Pulley
5. Motor Bracket
6. Motor Mount Plate
7. Table Saw Unit
8. Handwheels (2)
9. Arbor Wrench
10. Dado Insert
11. Standard Insert
12. Miter Gauge
14. Blade Guard
15. Blade Guard Bracket
16. Hardware Bags (5)
17. V-Belt Guard and Mounting Hardware
18. V-Belt Guard Bracket
19. Fence Unit (Separate Box W/ZF, ZFX and Pro)
20. Fence Rails (Separate Box)
Figure 6B. (G1022 Layout) Rip fence, rails and
extension wings will vary depending on model.
20
19
2
8
18
4
12
10
11
9
15
3
6
17
14
16
5
7
1