Filter
Top Products
G1067Z Wood Lathe -3-
12. USE SAFETY GLASSES AND EAR PRO-
TECTION. Also use a DUST MASK if the
operation is dusty.
13. DO NOT OVERREACH. Keep proper foot-
ing and balance at all times.
14. MAINTAIN TOOLS IN TOP CONDITION.
Keep tools sharp and clean for best and
safest performance. Follow instructions for
lubricating and changing accessories.
15. DISCONNECT TOOLS FROM POWER
before servicing and when changing
accessories.
16. AVOID ACCIDENTAL STARTING. Make
sure the switch is in the “OFF” position
before plugging in the cord.
17. CHECK DAMAGED PARTS. Do not oper-
ate the machine until you are certain it is in
perfect running condition.
18. NEVER LEAVE THE TOOL RUNNING
UNATTENDED - TURN POWER OFF. Do
not leave the tool until it comes to a full
stop.
19. DO NOT OPERATE THE TOOL IF USING
DRUGS, ALCOHOL, OR MEDICATION.
20. DO NOT WORK IN HASTE or operate
machine if you are fatigued.
21. IF THERE IS SOMETHING YOU DO
NOT KNOW OR UNDERSTAND
ABOUT THIS TOOL, DO NOT OPER-
ATE IT! Ask for help first. Confusion
can lead to disaster.
22. BAD HABITS ARE DANGEROUS.
Review all safety procedures often.
These safety rules cannot cover every situation
in a woodshop. Consider your conditions when
setting up or operating your Wood Lathe.
1. KNOW YOUR POWER TOOL. Read the
owner’s manual carefully. Learn the tool’s
applications and limitations, as well as its
particular hazards.
2. KEEP ALL GUARDS IN PLACE and in
working order.
3. GROUND ALL TOOLS. If an adapter is
used to accommodate a two-prong recep-
tacle, the adapter plug must be attached to
a known ground. Never remove the
grounding prong.
4. REMOVE ADJUSTING KEYS AND
WRENCHES. Make it a habit to check that
keys and wrenches are removed from the
machine before turning it on.
5. KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
6. AVOID DANGEROUS ENVIRONMENTS.
Do not use power tools in damp or wet
locations or expose them to rain. Keep
your work area well lighted.
7. KEEP CHILDREN AND VISITORS
AWAY. All children and visitors should be
kept a safe distance away from your work
area.
8. MAKE WORKSHOP CHILD-PROOF with
padlocks, master switches, or by remov-
able starter keys.
9. DO NOT FORCE TOOL. Tools work better
and safer when they are allowed to per-
form at their own speed.
10. WEAR PROPER APPAREL. Do not wear
loose clothing, gloves, neckties, or jewelry
that can get caught in moving parts. Non-
slip footwear must be worn. Long hair
should be tied back or wear a hat.
11. NEVER STAND ON, OR LEAN ON THE
TOOL. Doing so could cause injury.
Safety Rules For All Tools