Filter
Top Products
-4- G1067Z Wood Lathe
Unpacking
The Model G1067Z Wood Lathe is shipped from
the manufacturer in a carefully packed carton. If
you discover the machine is damaged after
you’ve signed for delivery, please call Customer
Service immediately for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Piece Inventory
After all the parts have been removed from the
carton, you should have:
• Main Lathe Unit
• On/Off Switch and Front/Rear Covers
• Index Pin
• 6'' Face Plate
• 12'' Tool Rest
• Tool Rest Support
• Tool Rest Extension
• Knock Out Bar
• Stand Legs (4)
• Stand Support, Long (2)
• Stand Support, Short (2)
• Upper Mount Plate (2)
• End Stand Support (2)
Fasteners:
• Carriage Bolt
5
⁄16
"- 18 x
3
⁄4
" 24
• Flat Washer
5
⁄16" 32
• Cap Screw
5
⁄16"- 18 x 1
1
⁄4" 8
• Hex Nut
5
⁄16
"- 18 32
• Phillips
®
Head Screw 10 - 24 x
3
⁄8" 12
In the event that any non proprietary parts are
missing (e.g. a nut or a washer...), we would be
glad to replace them, or, for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
The G1067Z is a heavy machine (190 lbs.
shipping weight). DO NOT over-exert your-
self while unpacking or moving your
machine – get assistance. In the event that
your lathe must be moved up or down a
flight of stairs, be sure that the stairs are
capable of supporting the combined
weight of people and the machine. Serious
personal injury may occur.