Filter
Top Products
-24- G1148 15" Bandsaw
Shielded and pre-lubricated ball bearings require
no lubrication for the life of the bearings. All bear-
ings are standard sizes and replacements can be
purchased from our parts department or bearing
supply store.
As for other items on this machine, such as
adjustment controls, an occasional “shot” of light
oil is just about all that is necessary. Before apply-
ing, however, wipe off any sawdust with a clean
cloth, towel or dry paint brush and spray on the
lubricant. Ensure that oil does not get on the pul-
leys or V-belts because it could cause belt deteri-
oration and slipping.
Lubrication
Always be aware of the condition of your band-
saw before using it. Routinely check the condition
of the following items and repair or replace as
necessary.
1. Loose mounting bolts.
2. Worn switch.
3. Worn or damaged blade.
4. Worn or damaged support bearings or
guide bearings.
Miscellaneous