Filter
Top Products
G1495 Heavy-Duty Wood Lathe
-9-
Unpacking
This machine is shipped from the manufacturer in
two carefully packed cartons. If you discover the
machine is damaged after you’ve signed for deliv-
ery, and the truck and driver are gone, you will
need to file a freight claim with the carrier. Save
the containers and all packing materials for pos-
sible inspection by the carrier or its agent.Without
the packing materials, filing a freight claim can be
difficult.
If you need assistance determining
whether you need to file a freight claim, or with
the procedure to file one, please contact our
Customer Service.
Piece Inventory
Parts should be as follows (See Figure 3):
• Stand Assembly w/ Motor Installed
• Lathe Assembly
• V-Belt
• Right Hand Stand
• Support Shelves (2)
• Floor Brackets (3)
• Shield
• Shield Support Tube
• Shield Sliding Support
• Shield Hardware Bag
Mounting Bars 2
Hex Bolts
5
⁄
16" - 18 x 4
1
⁄
2"2
Flat Washers
5
⁄16"4
• Tailstock Handle
• Sanding Attachments
Flap Sander 1
Pneumatic Drum 1
Aluminum Sanding Disc 1
Garnet Sanding Disc 1
• Arbor for Mounting Sanding Acc
• Tilting Work Table
• Work Table Support Spindle
• Outboard Tool Rest Bracket w/ 3 Bolts
• Outboard Tool Rest Support
• Outboard Tool Rest Post w/ Nut
• Faceplate
• Miter Gauge
• Tool Rest Holder
• Tool Rest
• Knockout Bar
• Allen
®
Wrench 6mm
• Hardware Bag
Hex Bolts
5
⁄16" - 18 x
3
⁄4"18
Flat Washers
5
⁄16"36
Cap Screws
5
⁄16" - 18 x 2
1
⁄2"6
Hex Nuts
5
⁄16" - 18 24
In the event that any generally used fasteners are
missing, we can replace them, or, for the sake of
expediency, replacements can be obtained at
your local hardware store.
The G1495 is a heavy machine (265 lbs.
shipping weight). DO NOT over-exert your-
self while unpacking or moving your
machine – get assistance. In the event that
your Lathe must be moved up or down a
flight of stairs, be sure that the stairs are
capable of supporting the combined weight
of people and the machine. Serious per-
sonal injury may occur.
NOTICE
A full parts list and illustrations can be
found at the back of this manual. Use this
information to identify parts or to clarify
assembly steps.
Figure 3. Parts Inventory.