Filter
Top Products
- 11 -
FEED RATE
FEET/MIN
16 19 26 30 43 52
GEAR
ARRANGEMENT
32
30
26
26
30
32
18
20
24
24
20 18
Figure 11
XI. MAINTENANCE
A. GEARBOX
The internal gearbox holds 65cc of SAE 30W gear oil. The oil should be drained and replaced after
every 500 hours of operation. A drain plug at the bottom of the gearbox provides access for removal
of old oil. Re-fill to within
3
/4" of the filler plug.
B. ROLLERS
Each of the three roller wheels is fitted with a grease fitting. Lubricate after every 200 hours of use.
C. CHAINS AND GEARS
Lubricate drive gears and chains with grease after every 200 hours of operation. Clean and lubri-
cate all the machined surfaces with light machine oil.
XII. CLOSURE
The following pages contain machine specifications, parts lists, parts diagrams and warranty and
return information for your Model G1778 Power Feeder.
Feel free to write or call us if you have questions. Our service staff will be glad to help you if you
need parts or service assistance. If you have questions or comments about this manual, please
write to our Bellingham, Washington location.
Thank you for your purchase. We sincerely appreciate your business and look forward to serving
you again.