Grizzly G4186Z Saw User Manual


 
-8- G4186Z 18" Bandsaw
Unpacking
The bandsaw is shipped from the factory in a
carefully packed crate. If you find the machine to
be damaged after you have signed for delivery,
and the truck and driver are already gone, you
will need to file a freight claim with the carrier.
Save the containers and all packing materials for
inspection by the carrier or their agent. Without
the packing materials, filing a freight claim can be
difficult. If you need advice regarding this situa-
tion, please call us immediately.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Parts Inventory
After all the parts have been removed from the
crate, you should have:
• Bandsaw Unit
• Table
• Table Bracket
• Fence
• Fence Rails
• Miter Gauge
Hardware Bag Qty
Cap Screws
1
4
" - 20 x 1
1
2
"4
Fence Spacers 4
Table Insert 1
Table Trunnion Knobs 2
Lock Washers
3
8"2
Roll Pin 3 x 10mm 1
Allen
®
Wrench 3mm 1
Allen
®
Wrench 4mm 1
Allen
®
Wrench 5mm 1
Round Guide Block 6
Setscrew
1
4"-20 x
1
4"6
In the event that any parts are missing, we will be
happy to replace them. Contact our Customer
Service number for assistance. If any non-propri-
etary parts such as nuts, bolts or washers are
missing, we will be happy to replace these too,
but for the sake of expediency, these items can
be obtained at your local hardware store.
The model G4186Z is a
heavy machine (345 lbs.
shipping weight). DO NOT
over-exert yourself while
unpacking or moving your
machine – get assistance.
If moving this machine up
or down stairs, the
machine must be disman-
tled and moved in smaller
pieces. Make sure the
stairs are capable of sup-
porting the combined
weight of the machine
parts and the people mov-
ing them.
Some die-cut metal parts may have sharp
edges (“flashing”) on them after they are
formed. Please examine the edges of all die-
cut metal parts before handling them.
Failure to do so could result in injury.