Filter
Top Products
G5787 Meatcutting Bandsaw -7-
Unpacking
The meatcutting bandsaw is shipped disassem-
bled from the manufacturer in a carefully packed
carton. If you discover the machine is damaged
after you’ve signed for delivery, and the truck and
driver are gone, you will need to file a freight
claim with the carrier. Save the containers and all
packing materials for possible inspection by the
carrier or its agent. Without the packing materials,
filing a freight claim can be difficult. If you need
assistance determining whether you need to file a
freight claim, or with the procedure to file one,
please contact our Customer Service.
The Model G5787 is a
heavy machine (106 lbs.
shipping weight). DO
NOT over-exert yourself
while unpacking or mov-
ing your machine—get
assistance.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
After all the parts have been removed from the
carton, you should have:
Item
Qty
Bandsaw Unit 1
Table 1
Motor 1
Front Panel 1
Rear Panel 1
Top Panel 1
Motor Mount Plate 1
Top Panel Brace 1
Side Braces 1
Motor Brace 1
Plastic Side Panels 2
START/STOP Switch 1
Rubber Switch Cover 1
Power Cord 1
Slide Rails 2
Large Fence 1
Small Fence 1
Knob Screws 2
Fence Brackets 2
Large Fence Rail 1
Small Fence Rail 1
Table Force Plate 1
Motor Pulley 1
Rubber Feet 4
Mount Brackets 4
Grinder Assembly 1
Plastic Pusher 1
Sausage Stuffer 1
V-Belt A-42 1
Hardware
Qty
Hex Head Bolts
1
⁄4"-20 x
3
⁄4"6
Hex Head Bolts
1
⁄4"-20 x 1" 4
Hex Head Bolts
5
⁄16"-18 x 1" 4
Cap Screws
1
⁄4"-20 x
3
⁄4"4
Brass Screws 3mm x 11mm 12
Carriage Bolts
5
⁄16"-18 x
1
⁄2"25
Flat Washers
5
⁄16"33
Flat Washers
1
⁄4"12
Flat Washers
7
⁄16"3
Hex Nuts
5
⁄16"29
Hex Nuts
1
⁄4"10
Lock Washers
1
⁄4"4
In the event that any nonproprietary parts are
missing (e.g. a nut or a washer), we would be
glad to replace them, or, for the sake of expedi-
ency, replacements can be obtained at your local
hardware store.
Piece Inventory