Grizzly g9860 Biscuit Joiner User Manual


  Open as PDF
of 76
 


6.        


Figure 25
Note: When adjusted to the correct outfeed
table height, use the stop bolt for a conve-
nient method of ensuring the outfeed table is
set at the proper height.
7.      

5. 

  

The outfeed table MUST be even with the
cutter edges to reduce the risk of kickback
and to help ensure good cutting results.
Tip:
       

 Steps 1–5    
        
       
 
       
     
       


Figure 25.



 previous next