Filter
Top Products
-8- H3368 Grinder/Sander Combo
SECTION 5: SET UP
Unpacking
The Model H3368 is shipped from the manufac-
turer in a carefully packed carton. If you discover
the machine is damaged after you have signed
for delivery, immediately call Customer Service
for advice.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
Piece Inventory
NOTICE
A full parts list and breakdown can be found
toward the end of this manual. For easier
assembly, or to identify specific parts, please
refer to the detailed illustrations at the end of
the manual.
After all the parts have been removed from the
carton, you should have the parts shown in
Figure 4:
A. Spark Guard
B. Wheel Dressing Tool
C. Eye Shield & Bracket
D. Tool Rests
E. Hardware Bag
F. Grinder/Sander Unit
NOTICE
When mounted, the cooling tray can be easi-
ly damaged if the grinder is tipped forward.
Figure 4. Model H3368 loose parts from package.
D
C
B
E
F
A