Filter
Top Products
-18- H3368 Grinder/Sander Combo
Many belts are available with different grit sizes.
To remove/replace a sanding belt:
1. Disconnect the machine from the power
supply!
2. Remove the star knob from the right-hand
sanding belt cover as shown in Figure 17.
Replacing Belts
Figure 17. Removing star knob from cover.
Figure 19. Removing sanding belt.
Figure 18. Sanding belt tension knob.
3. Remove the right-hand sanding belt cover.
4. Loosen the sanding belt tension knob (shown
in Figure 18) on the top, left-hand side of the
sanding belt cover.
5. Pull the sanding belt tension knob down with
one hand and work the sanding belt off the
rollers with the other hand as shown in
Figure 19.
6. Install the new sanding belt in the reverse
order of removal and replace the belt cover.
7. Track the new sanding belt BEFORE turning
the machine ON.