Filter
Top Products
Model H8125 9.6V Mini Grinder Kit-2-
SECTION 1: SAFETY
For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazardous con-
ditions. This manual uses a series of symbols and signal words which are intended to
convey the level of importance of the safety messages. The progression of symbols
is described below. Remember that safety messages by themselves do not eliminate
danger and are not a substitute for proper accident prevention measures.
Indicates an imminently hazardous situation which, if
not avoided, WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
This symbol is used to alert the user to useful infor-
mation about proper operation of the equipment.
Safety Instructions for Machinery
1. READ THROUGH THE ENTIRE
MANUAL BEFORE STARTING
MACHINERY.
Machinery presents
serious injury hazards to untrained
users.
2.
ALWAYS USE ANSI APPROVED
SAFETY GLASSES WHEN OPERATING
MACHINERY
.
Everyday eyeglasses
only have impact resistant lenses,
they are NOT safety glasses.
3. ALWAYS WEAR A NIOSH
APPROVED RESPIRATOR WHEN
OPERATING MACHINERY THAT
PRODUCES DUST. Wood dust is
a carcinogen and can cause cancer
and severe respiratory illnesses.
4. ALWAYS USE HEARING
PROTECTION WHEN OPERATING
MACHINERY. Machinery noise can
cause permanent hearing damage.
5. WEAR PROPER APPAREL. DO
NOT wear loose clothing, gloves,
neckties, rings, or jewelry which may
get caught in moving parts. Wear
protective hair covering to contain
long hair and wear non-slip foot
-
wear.
6. NEVER OPERATE MACHINERY
WHEN TIRED, OR UNDER THE
INFLUENCE OF DRUGS OR
ALCOHOL. Be mentally alert at all
times when running machinery.