Filter
Top Products
SKU 04019 PAGE 5
8. MAKE SURE THE WORKPIECE IS SECURELY MOUNTED IN THE MINI
BENCH LATHE BEFORE TURNING ON THE LATHE. An excessively loose
workpiece can fly off the Lathe, causing severe personal injury and/or property
damage.
9. ALWAYS KEEP HANDS AND FINGERS AS FAR AWAY AS POSSIBLE FROM
THE MOVING PARTS OF THE MINI BENCH LATHE
10. ALLOW THE WORKPIECE TO TURN UP TO FULL SPEED BEFORE FEED-
ING A TOOL BIT (not included) INTO THE WORKPIECE. When turning off the
Mini Bench Lathe, allow the Workpiece to slow down and stop on its own. Do not
press against the Workpiece to stop it.
11. FEED THE TOOL BIT INTO THE WORKPIECE GRADUALLY. Do not force a
tool bit to remove material faster than it is designed to cut.
12. NEVER ATTEMPT TO REMOVE MATERIAL STUCK IN THE MOVING PARTS
OF THE MINI BENCH LATHE WHILE IT IS PLUGGED IN AND RUNNING.
13. NEVER STAND ON THE MINI BENCH LATHE. Serious injury could result if the
Mini Bench Lathe is tipped or if the moving parts of the Lathe are accidentally
contacted.
14. ALWAYS TURN THE POWER SWITCH (part #2) TO ITS “OFF” POSITION
AND UNPLUG THE MINI BENCH LATHE FROM ITS ELECTRICAL OUTLET
BEFORE PERFORMING ANY INSPECTION, ADJUSTMENTS, MAINTE-
NANCE, OR CLEANING PROCEDURES.
7. KEEP ALL SAFETY GUARDS IN PROPER WORKING ORDER, PROPER
ADJUSTMENT, AND PROPER ALIGNMENT.
15. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities, contain chemicals known (to the State of California)
to cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are: lead from lead-based paints, crystalline silica from bricks
and cement or other masonry products, arsenic and chromium from chemically
treated lumber. Your risk from these exposures varies, depending on how often
you do this type of work. To reduce your exposure to these chemicals: work in a
well ventilated area, and work with approved safety equipment, such as those
dust masks that are specially designed to filter out microscopic particles.
(California Health & Safety Code 25249.5, et seq.)
16. WARNING: People with pacemakers should consult their physician(s) before
using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.