Filter
Top Products
sure this product is always plugged into a grounded 3-hole electrical receptacle
with an appropriate breaker switch in-line.
2. MAKE SURE THE POWER SWITCH IS IN THE “OFF” POSITION BEFORE
PLUGGING IN THE POWER CORD.
3. DO NOT ABUSE THE POWER CORD. Do not use the cord to pull the 3-prong
plug from a power outlet. Keep cord away from heat, oil, sharp edges, and moving
parts. Replace damaged cord immediately. Route the power cord safely. Protect it
from being damaged by other equipment in the shop. Do not route the cord where it
can be walked on or tripped over.
4. IF YOU USE AN EXTENSION CORD, MAKE SURE TO USE ONLY UL
APPROVED CORDS HAVING THE CORRECT GAUGE AND LENGTH.
(SEE FIGURE A.)
5. MAINTAIN A SAFE WORK ENVIRONMENT. Do not use this product in or near
damp or wet areas. Do not expose this product to rain. Keep work area well lit.
Use this product in a well ventilated area. Do not operate this product in the pres-
ence of flammable liquids, gases, or dust. To avoid accidental electric shock, do
not let your body come in contact with grounded surfaces such as pipes, radiators,
ranges and refrigerators.
6. DO NOT FORCE THE EQUIPMENT. This product will do the work better and safer
at the speed and capacity for which it was designed.
7. KEEP ALL GUARDS IN PLACE AND IN WORKING ORDER.
8. REMOVE ALL ADJUSTING WRENCHES FROM THE DRILL PRESS BEFORE
TURNING IT ON.
9. AVOID UNINTENTIONAL STARTING. Make sure you are prepared to begin work
before turning the START switch on.
SKU 44836 PAGE 4
FIGURE A