Filter
Top Products
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT,
THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THat ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LI-
CENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT
OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLA-
TION OF REPLACEMENT PARTS THERETO.
Maintenance
NOTE: Some parts are listed and shown for illustration purposes only and are not
available individually as replacement parts.
Parts List
1. Check the integrity of the 3 prong plug and cord. Make sure the grounding pole
is not bent and the cord isn’t torn or frayed.
2. Check your Collection Bags (#36) prior to each use for tears or fraying.
Replace if necessary.
3. Periodically tighten the Belts (#34) and Hose Clamps (#31).
4. Keep the Motor (#8) clean of dirt and debris.
Part No. Description Part No. Description
1 Caster, 3” lockable 20 Washer, M10
2 Nut, M8-1.25 21 Hex Screw, M10-1.5x16
3 Base Plate 22 Turbo Fan
4 Washer, M8 23 Hex Screw, M6-1.0x10
5 Motor Base 24 Inlet
6 Hex Screw, M8-1.25x16 25 Inlet Cover
7 Power Cord 26 Hex Screw, M6-1.0x20 LH
8 Motor, 110V, 60Hz, 2HP 27 Washer
9 Switch 28 Hex Screw, M8-1.25x8
10 Screw 29 Packing
11 Hex Wrench, 4mm 30 Outlet
12 Hex Wrench, 5mm 31 Hose Clamp
13 Upper Bag Support 32 Hose
14 Collector Support 33 Collector
15 Hex Screw, M6-1.0x20mm 34 Belts
16 Washer, M6 35 Filter Bag
17 Key 36 Collection Bag
18 Packing 37 Handle
19 Nut, M6-1.0 38 Fan Housing
39 Bolts & Nuts for Handle
40 Hex Wrench
REV 08/02 REV 09/02 REV 05/03 REV 02/05
SKU 45378 Page 8