Filter
Top Products
SKU 67026 For technical questions, please call 1-800-444-3353. Page 12
General Operating Instructions
WARNING! 1. TO PREVENT
SERIOUS INJURY,
BEFORE OPERATION:
Remove Battery Pack.a.
Adjust Blade Depth to extend be-b.
yond bottom of workpiece by 1/4”
or less. Lock Depth Knob after
adjustment.
Make sure that all guards are in c.
place and in proper working order.
Tighten all knobs/bolts securely.d.
Tighten Blade Bolt. (Blade Bolt e.
may loosen when the automatic
blade brake engages.)
Install fully charged Battery Pack 2.
(67029, sold separately) into base at
back of handle.
Hold the saw with one hand on the 3.
Front Handle and the other hand on
the Handle.
Align Saw on cut line with the larger 4.
part of the workpiece to the left of the
Saw Blade.
5.
Allow the Blade to come up to full 6.
speed before contacting the work-
piece.
After completing the cut, release the 7.
trigger. Make sure that the Movable
Guard closes immediately.
To prevent accidents, turn off the tool 8.
and disconnect the Battery Pack after
use. Clean, then store the tool in-
doors out of children’s reach.