Filter
Top Products
SKU 67026 For technical questions, please call 1-800-444-3353. Page 7
Do not lay the tool down until it has 22.
come to a complete stop. Moving
parts can grab the surface and pull
the tool out of your control.
When using a handheld power tool, 23.
both hands to resist starting torque.
Do not leave the tool unattended 24.
when the Battery Pack is connected.
Turn off the tool, and remove Battery
Pack before leaving.
Use clamps (not included) or other 25.
practical ways to secure and support
the workpiece to a stable platform.
Holding the work by hand or against
your body is unstable and may lead
to loss of control.
26. The battery charger gets
hot during use. The
charger’s heat can build
up to unsafe levels and
receive adequate ventilation, due to
an electrical fault, or if it is used in a
hot environment.
-
mable surface. Do not obstruct any
vents on the charger. Especially
avoid placing the charger on car-
pets and rugs; they are not only
ammable, but they also obstruct
vents under the charger.
Place the charger on a stable, solid,
stable metal workbench or concrete
smoke detector in the area. Fre-
quently monitor the charger and
battery while charging.
This product is not a toy. Keep it out 27.
of reach of children.
Verify that there are no utility lines or 28.
hardware in or near the workpiece.
This is especially critical for plunge
cuts.
People with pacemakers should 29.
consult their physician(s) before use.
-
imity to heart pacemaker could cause
pacemaker interference or pacemak-
er failure. In addition, people with
pacemakers should:
on.
avoid electrical shock.
WARNING: Some dust created by 30.
power sanding, sawing, grinding, drill-
ing, and other construction activities,
contains chemicals known [to the
State of California] to cause cancer,
birth defects or other reproductive
harm. Some examples of these
chemicals are:
-
ment or other masonry products
-
cally treated lumber
Your risk from these exposures var-
ies, depending on how often you do
this type of work. To reduce your
exposure to these chemicals: work in
a well ventilated area, and work with
approved safety equipment, such as
those dust masks that are specially
particles. (California Health & Safety
Code § 25249.5, et seq.)