Filter
Top Products
Page 7For technical questions, please call 1-800-444-3353.SKU 67696
68149
SPECIFICATIONS
Electrical
Requirements
120 V~ / 60 Hz / 10 A
Running HP 1.5 HP
Air Outlet Size 1/4” -18 NPT
Coupler
Female Industrial-type Quick
Coupler
Air Pressure
Auto Shut-Off @ 150 PSI
Restart @ 120 PSI
Air Tank Capacity 6 Gallons
Air Flow Capacity
2.5 SCFM @ 90 PSI
3.4 SCFM @ 40 PSI
Pump Single stage
Line Cord
6’10” x 14 AWG with 3-prong
plug
Thermal
Protection
Motor equipped with overheat
auto shutdown
Sound Level 90 Db (A)
NOTE: Allow adequate time when lling tires.
The larger the tire, the more time to ll is
needed.
NOTE: This product is designed for ination,
stapling, brad nailing and air brushing.
UNPACKING
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon as
possible.
INSTRUCTIONS FOR PUTTING
INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set up
or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch “OFF”,
unplug the Compressor from its
electrical outlet, and release all
air pressure from the air tank
before assembling or making any
adjustments to the compressor.
Note: For additional information regarding the
parts listed in the following pages, refer
to the Assembly Diagram near the end of
this manual.
Functions
Figure 1
Output Air
Pressure
Gauge (109)
Regulator
Knob
Air Outlet
Tank Air
Pressure
Gauge (109)
Power
Switch
(133)
Safety Valve
(110)
Drain Valve
(107)
(Back of Compressor)
Compressor Area Set Up
Designate a work area that is clean and 1.
well-lit. The work area must not allow
access by children or pets to prevent
injury.
Locate the Compressor on a at level 2.
surface to prevent tipping and damage.
Keep at least 12” of space around the
unit to allow air circulation.