Filter
Top Products
SKU 92658 For technical questions, please call 1-800-444-3353. Page 14
FIGURE 3
Arbor Nut (40)
Outer Flange (41)
Inner Flange (43)
Blade (42)
4. With the Bevel Table (3) still open, wipe out the Tray (46), and then fill it with cold
water, up to just below the overflow hole. The Tray (46) has 2 Drains that must
always be clear of dirt or debris. Check that both the Drain and the Additional
Safety Overflow Drain are unclogged prior to operation. See FIGURE 4 below.
5. Swing back the support Arm and adjust the Bevel Table (3) to its down position.
ASSEMBLY AND OPERATING INSTRUCTIONS (continued)
FIGURE 4
Tray (46)
Drain
Additional Safety
Overflow Drain
Blade (42)