Harbor Freight Tools 93257 Nail Gun User Manual


 
SKU 93257 For technical questions, please call 1-800-444-3353 PAGE 9
3. To fire, place the Safety (38) of the Nailer on the workpiece. The Nailer should
not fire if the Safety is not depressed. Once depressed, gently and briefly
squeeze the Trigger (60) once. Do not fire repeatedly. Nails could bounce off
of one another, damaging the workpiece or causing personal injury.
(See Figure E.)
4. Do not press the Safety (38) against the workpiece with extra force. Allow the
tool to do the work. Always allow the tool to recoil off the work surface.
(See Figure E.)
5. When finished using the Nailer, always disconnect the tool from its air supply.
Empty the Magazine (85) completely of nails. Attempt to fire the Nailer into a
piece of scrap wood to ensure it is disconnected and is incapable of firing any
nails. (See Figure E.)
6. Make sure to store the Nailer in a clean, dry, safe location out of reach of children.
MAGAZINE
(85)
SAFETY
(38)
TRIGGER
(60)
AIR PLUG
(82-not included)
FIGURE E
EXHAUST COVER
(2)
REV 12/06