Harbor Freight Tools 93351 Air Compressor User Manual


 
SKU 93351 For technical questions, please call 1-800-444-3353. Page 6
WARNING! Never use plastic (PVC) pipe for compressed air. Serious injury or death
could result. Any tube, pipe, or hose used must have a pressure rating higher than
150 PSI. Minimum recommended pipe size: Up to 50 feet long use 1/2” diameter.
Greater than 50 feet use 3/4” diameter. Larger diameter pipe is always better.
This Air Compressor is not designed for outdoor use.
WARNING! This Air Compressor is extremely top heavy. The unit must be bolted
to the floor with isolation pads (not included) or secured with a wall cable (not in-
cluded) before operating to prevent equipment damage, injury, or death.
(See Illustration Below.)
Make sure all tools and equipment used with the Air Compressor are rated to
the appropriate capacity. Do not use any tool or equipment that does not operate
from 85 PSI to 110 PSI.
Drain the Air Compressor every day. Do not allow excessive moisture to build
up inside the Air Compressor’s Tank.
Avoid injury. Never direct the Air Outlet Valve at people or animals.
Do not alter or remove the Safety Valve (67). Do not open the Pressure Switch
Box (66).
Do not handle the ON/OFF Knob (86) or Power Cord Plug with wet hands.
Make sure the Air Compressor is located on a flat, level, sturdy surface capable
of supporting the weight of the Compressor, operator(s), and any additional
tools and equipment.
Keep all electrical connections dry and off the ground.
Industrial applications must follow OSHA guidelines.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
WALL CABLE
(NOT INCLUDED)
WALL CABLE
(NOT INCLUDED)
ISOLATION PAD
(NOT INCLUDED)
ISOLATION PAD
(NOT INCLUDED)
WALL CABLE
(NOT INCLUDED)
WALL CABLE
(NOT INCLUDED)
ISOLATION PAD
(NOT INCLUDED)
ISOLATION PAD
(NOT INCLUDED)
REV 05/06