Filter
Top Products
SKU 93364 For technical questions, please call 1-800-444-3353 PAGE 4
SERVICE
12. Bead Roller Kit service must be performed only by qualified service
technician. Service or maintenance performed by unqualified personnel could
result in a risk of injury.
13. When servicing the Bead Roller Kit, use only identical replacement parts.
Follow instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Bead Roller Kit. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
2. Use the right product for the job. There are certain applications for which this
product was designed. Do not use small tools, equipment, or attachments to do
the work of larger industrial tools, equipment, or attachments. Do not use this
product for a purpose for which it was not intended.
3. Avoid moving parts during operation. Keep fingers and hands away from
gears, rollers, dies, cutting plates, and all moving parts.
4. Two person operation. Two people are needed to operate the Bead Roller
machine. One person is needed to feed the sheet metal, while a second person
cranks the Bead Roller’s handle.
5. 18 Gauge limit. Do not use the Bead Roller on metal thicker than 18 gauge.
6. During set up and operation. Use a standard shop vise (not included) to hold
the Bead Roller assembly (see Figure A, page 5). Make sure the vise is bolted
or permanently fastened to a flat, level, sturdy workbench capable of supporting
the weight of the Bead Roller, vise, workpieces, and any additional tools.
7. Industrial applications must follow OSHA requirements.
9. WARNING! The warnings and cautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be understood
by the operator that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.
8. Store idle tools. When not in use, store the Bead Roller Kit in a clean, dry, safe
location out of reach of children.