Filter
Top Products
SKU 93496
For technical questions please call 1-800-444-3353
Page 2
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for
future reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should al-
ways be followed to reduce the risk of personal injury and dam-
age to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools such
as air compressor in damp or wet locations. Do not expose to rain. Keep
work area well lit. Do not use electrically powered tools in the presence of
flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do
not let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry
location to inhibit rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
:noitcurtsnoC
,emarFmunimulAtsaC
citengaMdnatelnIriAleetS
.redloHliaNleetS
dnahtgneLliaN.xaM
:eguaG
eguag8x
L"½-3
)dedulcnitonslian(
:snoisnemiDtelnIriAtelnIelameFTPN81"¼
dnaekortSrevirD
:etuniMrepstcapmI
,ekorts"4/
1
etuniMrePswolB000,1
:noitpmusnoCriAmfc4-2:erusserPriAgnitarepO*isp521-07
:snoisnemiDllarevOH"¼-5xL"¾-4xW"¼
-3:thgieWteN.sbL56.2
REV 11/06
* The air pressure setting must not exceed job site regulations/restrictions.
The air pressure setting must not exceed 90 PSI when being used with work
pieces that have a thickness of less than 1-3/4”.