Filter
Top Products
SKU 94355 For technical questions, please call 1-800-444-3353 PAGE 10
4. Pressure Regulator Knob (14): The Pressure Regulator Knob enables the
operator to adjust output pressure to the pneumatic tool being used. To increase
the amount of air pressure to the tool, turn the Pressure Regulator Knob clock
wise. To decrease the amount of air pressure to the tool, turn the Pressure
Regulator Knob counterclockwise. (See Figure D.)
5. Tool Pressure Gauge (13): The Tool Pressure Gauge measures the pressure
level of air flowing to the pneumatic tool being used, and is adjustable using the
Pressure Regulator Knob (14). (See Figure D.)
6. Quick Coupler (11): The Quick Coupler connects to the air output hose which,
in turn, connects to the pneumatic tool being used. To connect an air hose, push
in on the Quick Coupler. To disconnect the air hose, pull back on the Quick
Coupler collar. (See Figure D.)
OPERATING INSTRUCTIONS
1. CAUTION! Always make sure the Pressure Switch (57) of the Air
Compressor is in its “OFF” position and the unit is unplugged from its electrical
outlet prior to performing any service, maintenance, or changing accessories on
the Compressor.
SAFETY VALVE
(10)
FIGURE D
QUICK COUPLER
(11)
TOOL
PRESSURE
GAUGE
(13)
TANK
PRESSURE
GAUGE
(13)
PRESSURE
REGULATOR
KNOB
(14)
PRESSURE SWITCH
(57)