Harbor Freight Tools 94355 Air Compressor User Manual


 
SKU 94355 For technical questions, please call 1-800-444-3353 PAGE 6
5. Avoid injury. Never direct compressed air at people or animals.
6. Make sure the Air Compressor is located on a flat, level, sturdy surface
capable of supporting the weight of the Compressor and any additional
tools and equipment.
7. Industrial applications must follow OSHA guidelines.
8. Never stand on the Air Compressor. Serious injury could result if the
Compressor is tipped.
9. Never leave the Air Compressor unattended when it is plugged in and
running. Turn off the Compressor, and unplug the unit before leaving.
10. Do not allow children and other unauthorized people to handle or play with
the Air Compressor.
11. Do not move or transport the Compressor if the unit is under pressure.
12. Do not force the Compressor. This tool will do the work better and safer at
the speed and capacity for which it was designed.
13. This Compressor will automatically shut off on overload or under excessive
heat. Should this occur, turn the Pressure Switch (57) to its “OFF” position. Wait
until the Compressor cools. Then, turn the Pressure Switch to its “ON” position
to resume work.
14. WARNING! This product contains brass, which is a chemical known to the
State of California to cause cancer and birth defects and other reproductive
harm.
(California Health & Safety Code 25249.5, et seq.)
15. WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference to or failure of the pacemaker.
16. WARNING! The warnings and precautions discussed in this manual cannot
cover all possible conditions and situations that may occur. It must be under
stood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS