Filter
Top Products
SKU 94443
For technical questions, please call 1-800-444-3353
Page 2
Specifications
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating
and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice
number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future
reference.
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the
risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can
cause you to lose control. Protect others in the work area from debris such as chips and water.
Provide barriers or shields as needed.
4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance
with all codes and ordinances. Never remove the grounding prong or modify the plug in any
way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt
whether the outlet is properly grounded. If the tool should electrically malfunction or break down,
grounding provides a low resistance path to carry electricity away from the user.
5. Double insulated tools are equipped with a polarized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet.
Do not change the plug in any way. Double insulation eliminates the need for the three wire
grounded power cord and grounded power supply system.
6. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body is grounded.
7. Do not expose power tools to rain or wet conditions. Do not allow water from the Water
Tank (31) to enter the Motor (22). Never move the tool with water inside the tank. Ensure
that the Overfill Plug (53) remains unclogged at all times. Water entering a power tool will
increase the risk of electric shock and may damage the tool.
noitcurtsnoC
gnidilshtiwepythtabretaW
sediugelbatsujdadnaelbat
eziSedalB
eziSrobrAeldnipS
.aiD"8
gnihsub"8/5,5.1xmm01
rewoP
snoitacificepS
,rewopesroh1
zH06,spmA8,CAV021
deepSrotoMMPR0024
yticapaCgnittuC
"½-52:tucpiR
"81:tuclanogaiD
"½-1:tucfohtpeD
levarTelbaTedilS
elacSecneF
eguaGretiMelbatsujdA
"½-32
thgir"7-0,tfel"01-0
°0-°54-°0
yticapaCretaWrotcetorpllifrevohtiwhtped"¾-2dohteMtuCleveBkcolbgnittucleveb°54
snoisnemiDH"½-11xW"½
-71xL"62thgieWteN.sbL63