Filter
Top Products
SKU 94585 For technical questions please call 1-800-444-3353. Page 2
SPECIFICATIONS
No Load Speed 1700 RPM
Max. Recommended Air Pressure 90 PSI
Air Consumption 5 CFM
Air Inlet 1/4” -18 NPT
Chuck Type 3 Jaw Keyed Chuck
Chuck Size 3/8”
Weight 2.4 lbs.
SAVE THIS MANUAL
You will need the manual for the safety warnings and cautions, assembly instructions, operating
procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice
with this manual. Write the invoice number on the inside of the front cover. Keep both this manual
and your invoice in a safe, dry place for future reference.
SAFETY WARNING & CAUTIONS
WARNING: When using pneumatic equipment, basic safety precautions should always be
followed to reduce the risk of personal injury and hazards due to over pressurization.
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!
1. KEEP WORK AREA CLEAN. Cluttered, damp or wet areas invite injuries.
2. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them
handle machines, tools, or hoses.
3. STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
4. DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for which it
was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s
capacities.
5. USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not
intended.
6. DRESS SAFELY. Do not wear loose clothing or jewelry as they can be caught in moving
parts. Non-skid footwear is recommended. Wear restrictive hair covering to contain long hair.
7. USE EYE, BREATHING AND EAR PROTECTION. Wear ANSI approved impact safety
goggles, ANSI approved hearing protectors, and ANSI approved dust mask or respirator
when using this product. ANSI approved safety impact eye glasses, hearing protectors, and
dust masks and respirators are available from Harbor Freight Tools.