Filter
Top Products
Page 2
SKU 97526
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Fastener Type/Gauge Headless Pins, 23 Gauge
Magazine Capacity 100 Pins
Operating Pressure 60-100 PSI; 120 PSI Max.
Air Consumption 5.5 CFM @ 90 PSI
Air Inlet 1/4” - 18 NPT
Pin Length Settings 1/2”, 5/8”, 3/4”, 7/8”, 1’”
Accessories
1 1/4”-18 NPT Air Coupler
1 3mm Hex Wrench
1 4mm Hex Wrench
Tool Oil
Net weight 2 lb.
Save This Manual
You will need this manual for
the safety warnings and precautions,
assembly, operating, inspection,
maintenance and cleaning procedures,
parts list and assembly diagram. Keep
your invoice with this manual. Write the
invoice number on the inside of the front
cover. Write the product’s serial number in
the back of the manual near the assembly
diagram, or write month and year of
purchase if product has no serial number.
Keep this manual and invoice in a safe
and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL
INSTRUCTIONS
Failure to follow all instructions
listed below may result in serious
injury.
SAVE THESE INSTRUCTIONS
1. Use compressed air only: Clean,
dry, regulated compressed air at
no more than 100 PSI. Never use
oxygen, carbon dioxide, combustible
gases, or any other bottled gas as a
power source for this tool.
2. Keep your work area clean and
well lit. Cluttered benches and dark
areas invite accidents.
3. Use protection: Always wear ANSI-
approved safety eye goggles, dust
mask/respirator, work gloves, hard
toed shoes, long sleeve shirt and
long pants when using or servicing
this Air Nailer.
4. Do not operate power tools in
explosive atmospheres, such as in
the presence of ammable liquids,
gases, or dust. Power tools create
sparks which may ignite the dust or
fumes.
5. Keep bystanders, children, and
visitors away while operating a
power tool. Distractions can cause
you to lose control. Protect others
in the work area from debris such as
chips and sparks. Provide barriers or
shields as needed.
6. Stay alert. Watch what you are
doing, and use common sense
when operating a power tool. Do
not use a power tool while tired
or under the inuence of drugs,
alcohol, or medication. A moment
of inattention while operating power
tools may result in serious personal
injury.
7. Dress properly. Do not wear loose
clothing or jewelry. Contain long
hair. Keep your hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
can be caught in moving parts.