Filter
Top Products
Page 4
SKU 97526
For technical questions, please call 1-800-444-3353.
SERVICE
1. Tool service must be performed
only by qualied repair personnel.
Service or maintenance performed by
unqualied personnel could result in
a risk of injury.
2. When servicing, use only identical
replacement parts. Follow
instructions in the “Inspection,
Maintenance, And Cleaning”
section of manual. Use of
unauthorized parts or failure to follow
instructions may create a risk of
injury.
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on
the Air Nailer. These carry important
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
2. Maintain a safe working
environment. Make sure there is
adequate surrounding workspace.
Do not use this product in a damp or
wet location.
3. When using this Air Nailer, always
maintain a rm grip on the tool
with both hands to resist starting
torque.
4. Avoid unintentional starting. Make
sure you are prepared to begin work
before turning on the air supply or
pressing the Trigger (27).
5. Never lay the tool down until it has
come to a complete stop. Moving
parts can grab the surface and pull
the tool out of your control.
6. Never leave this Air Nailer
unattended when it is plugged into
an air supply. Turn off the tool, and
unplug it from an air supply before
leaving.
7. WARNING: This product contains
or, when used, produces a
chemical known to the State of
California to cause cancer and
birth defects or other reproductive
harm. (California Health & Safety
Code § 25249.5, et seq.)