Filter
Top Products
SKU 41453 For technical questions, please call 1-800-444-3353. PAGE 10
5. Do not use solvents to wipe off the Cut-Off Saw, as damage may result.
If necessary, wipe with a damp cloth. You may use a mild detergent.
6. Do not introduce water into the electric motor through the motor vents.
7. Once clean, lubricate all moving parts with a light weight oil.
8. When storing, keep the Cut-Off Saw covered with a cloth cover.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE
TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY
KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.
Part # Description Qty. Part # Description Qty.
1 Outer Flange 1 34 Screw (M4 x 16) 1
2 Cutting Wheel (Not Included) 1 35 Cable Fixer 1
3 Inner Flange 1 36 Label 1
4 Rivet 1 37 Rotor 1
5 Spring 1 38 Bearing 1
6 Moveable Guard 1 39 Pinion 1
7 Bolt (M5 x 10) 3 40 Washer (6mm) 3
8 Washer (5mm) 3 41 Nut 1
9 Guard 1 42 Switch 1
10 Spindle 1 43 Capacitor 1
11 Insert 1 44 Left Housing 1
12 Cover 1 45 Spanner 1
13 Bolt 1 46 Flange Wrench 1
14 Bearing 1 47 Knob 1
15 Bearing Cover 1 48 Nut (10mm) 1
16 Washer (4mm) 1 49 Threaded Bolt 1
17 Screw (M4 x 10) 1 50 Split Pin 1
18 Gear 1 51 Chain 1
19 Washer (10mm) 1 52 Support 1
20 Washer (10mm) 1 53 Ring (6mm) 2
21 Bearing 2 54 Screw (M6 x 12) 1
22 Right Housing 1 55 Moveable Clamp 1
23 Screw 1 56 Pin 1
24 Ring (4mm) 1 57 Fixed Vise 1
25 Steel Sleeve 1 58 Screw (M6 x 12) 1
26 Brush Cover 2 59 Screw (M4 x 8) 1
27 Carbon Brush 2 60 Base 1
28 Brush Holder 2 61 Rubber Support 4
29 Inductor 1 62 Nut 4
30 Spring 1 63 Spring 1
31 Plug 1 64 Fixing Pin 1
32 Cable Sleeve 1 65 Washer (8mm) 1
33 Rotor Housing 1 --------- -----------------------
--
--------
PARTS LIST
REV 01/04