Filter
Top Products
SKU 41453 For technical questions, please call 1-800-444-3353. PAGE 7
REV 01/04; 01/05; 12/05
3. With assistance, pull the spring loaded Moveable Guard (6) up to its highest posi-
tion and hold it in place. (See Figure C.)
4. Insert Spanner (45) into the access slot behind Guard (9), so that it engages the
flats on the Spindle, and hold it firmly.
5. Use Wrench (46) to remove (CCW) the Outer Flange (1) from the Spindle.
6. Note: This saw accepts wheels with 2 different arbor sizes: 5/8”, 7/8”.
5/8” Arbor: Place the Wheel directly onto the spindle without using the Inner Flange
(3). Place the Flange on the spindle with the step
facing away from
the cutoff wheel.
7/8” Arbor: Install the Inner flange with the step facing the cutoff wheel. Place the
Wheel onto the spindle over the Inner Flange (3). Place the Flange
on the spindle with the step
facing
the cutoff wheel.
Check to ensure that the wheel is positioned correctly, then firmly tighten the Outer
Flange.
7. Allow the Moveable Guard (6) to return to its down position. (See Figure C.)
HANDLE
POWER SWITCH (42)
MOVEABLE GUARD (6)
FIXED VISE (57)
WITH ANGLE SCALE
KNOB (47)
BASE (60)
CUTTING SLOT
MOVEABLE CLAMP (55)
6”
CUTOFF
GRINDING WHEEL
(NOT PROVIDED)
HOUSING (22, 44)
FIGURE C