HP (Hewlett-Packard) AXCRN3-2G Welder User Manual


 
1.13 Documentation Changes
The following changes were made to the HP XC System Software Documentation Set
The following manuals have been affected by the new functionality delivered in this release
and have been revised accordingly:
HP XC Hardware Preparation Guide
HP XC System Software Installation Guide
HP XC System Software Administration Guide
HP XC System Software User's Guide
The information in the Configuring HP XC Systems With HP Server Blades and Enclosures -
Edition 9 HowTo was merged into the HP XC Hardware Preparation Guide and HP XC System
Software Installation Guide, reducing the number of documents you have to read to install
and configure an HP XC system that contains HP server blades and enclosures.
The HP XC System Software Release Notes are updated periodically. Therefore, HP recommends
that you go to http://www.docs.hp.com/en/linuxhpc.html and make sure you have the latest
version of this document because the version you are reading now might have been updated
since the last time you downloaded it.
HP XC HowTos On the Worldwide Web
HP XC information that is published between releases is issued in HowTo documents at the
following Web site:
http://www.docs.hp.com/en/linuxhpc.html
18 New and Changed Features