Filter
Top Products
HP XC Program Development Environment
The Program Development Environment home page provide pointers to tools that have been
tested in the HP XC program development environment (for example, TotalView® and other
debuggers, compilers, and so on).
http://h20311.www2.hp.com/HPC/cache/276321-0-0-0-121.html
HP Message Passing Interface
HP Message Passing Interface (HP-MPI) is an implementation of the MPI standard that has been
integrated in HP XC systems. The home page and documentation is located at the following Web
site:
http://www.hp.com/go/mpi
HP Serviceguard
HP Serviceguard is a service availability tool supported on an HP XC system. HP Serviceguard
enables some system services to continue if a hardware or software failure occurs. The HP
Serviceguard documentation is available at the following Web site:
http://www.docs.hp.com/en/ha.html
HP Scalable Visualization Array
The HP Scalable Visualization Array (SVA) is a scalable visualization solution that is integrated
with the HP XC System Software. The SVA documentation is available at the following Web site:
http://www.docs.hp.com/en/linuxhpc.html
HP Cluster Platform
The cluster platform documentation describes site requirements, shows you how to set up the
servers and additional devices, and provides procedures to operate and manage the hardware.
These documents are available at the following Web site:
http://www.docs.hp.com/en/linuxhpc.html
HP Integrity and HP ProLiant Servers
Documentation for HP Integrity and HP ProLiant servers is available at the following Web site:
http://www.docs.hp.com/en/hw.html
Related Information
This section provides useful links to third-party, open source, and other related software products.
Supplementary Software Products This section provides links to third-party and open source
software products that are integrated into the HP XC System Software core technology. In the
HP XC documentation, except where necessary, references to third-party and open source
software components are generic, and the HP XC adjective is not added to any reference to a
third-party or open source command or product name. For example, the SLURM srun command
is simply referred to as the srun command.
The location of each Web site or link to a particular topic listed in this section is subject to change
without notice by the site provider.
• http://www.platform.com
Home page for Platform Computing Corporation, the developer of the Load Sharing Facility
(LSF). LSF-HPC with SLURM, the batch system resource manager used on an HP XC system,
is tightly integrated with the HP XC and SLURM software. Documentation specific to
LSF-HPC with SLURM is provided in the HP XC documentation set.
Related Information 9