Hitachi C 10RB Saw User Manual


 
– 17 –
English
TABLE EXTENSION SCALE POINTER (FIG. P)
The table extension scale pointer (1) should be at 13
inches on the scale when the extension is in the closed
position. If not, loosen the holding screw (2), position
the pointer over 13 inches and re-tighten the screw.
Fig. P
ADJUSTING CAM LOCKING LEVER (FIG. Q)
If the extension table moves when it is open and locked,
then the cam locking lever (1) may be loose and need
adjustment, therefore, adjustment to the cam locking
lever is necessary. To adjust the locking lever tension,
turn the bar (2) with a 10 mm wrench until it is tightened,
but do not over tighten.
Fig. Q
1
2
1
2
13