Hobart Welding Products OM-474 Welding System User Manual


 
OM-474 Page 20
5-3. Remote Control (Optional)
Y Weld output terminals are
energized when Output
(Electrode) switch is On
(Hot) and engine is running.
1 Remote 14 Receptacle RC3
Connect optional remote control to
RC3 (see Section 4-7).
S-0774 / Ref. ST-154 862-A / Ref. ST-191 898
Example: Combination remote amperage control
In Example:
Range = 85 to 210 A DC
Min = 85 A DC
Percentage of Range = 50%
Max = 148 A DC (50% of 85 to 210)
Adjust optional remote controlSet switches Set range Set percentage
1
Max (148 A DC)
Min (85 A DC)
OR