Hobart Welding Products OM-478 Welder User Manual


 
OM-478 Page 20
4-9. Terminal Strip 3T Connections
Ref. ST-121 578-F / Ref. S-184 781-A
Y Stop engine.
If remote control plug does not fit in
receptacle RC3, wire cord directly
to terminal strip 3T.
Y Do not connect to Remote 14
receptacle RC3 and terminal
strip 3T at the same time. Use
only one remote control
method.
Open lower front door.
1 Terminal Strip 3T
Connect leads to 3T using terminal
information shown in Section 4-8.
Reinstall cover. Close door.
Tools Needed:
1
4-10. Air Compressor Connections
ST-800 727 / Ref. ST-121 578-F
Air compressor operates whenever
engine is running.
1 1/2 in NPT Air Compressor
Fitting
Connect quick-disconnect air hose
to fitting (hose not supplied).
2 Air Shutoff Valve
Be sure valve is in open position
when using air compressor.
Open Position
Closed Position
2
1