Filter
Top Products
OM-493 Page 22
7-3. Servicing Air Cleaner
aircleaner3 1/97 – ST-156 852 / Ref. ST-192 519-A / S-0759
Y Stop engine.
Y Do not run engine without air
cleaner or with dirty element.
1 Wrapper (Foam Element)
Wash wrapper with soap and water
solution. Allow wrapper to air dry
completely.
Spread 1 tablespoon SAE 30 oil
evenly into wrapper. Squeeze out
excess oil.
2 Element
Replace element if dirty, oily, or
damaged.
1
2
7-4. Overload Protection
Ref. ST-802 213-B / Ref. ST-192 519-A
Y Stop engine. Disconnect
negative (–) battery cable.
1 Fuse F1 (See Parts List)
F1 protects the exciter excitation
winding from overload. If F1 opens,
there is no/low weld and auxiliary
power output.
2 Fuse F6 (See Parts List)
F6 protects the engine wiring sys-
tem from overload. If F6 opens,
engine will not crank.
Replace any open fuses. Reinstall
cover before operating.
. When a fuse opens, it usually
indicates a more serious prob-
lem exists. Contact a Factory
Authorized Service Agent.
3/8 in
1
2
Tools Needed: