Hobart Welding Products OM-493 Welding System User Manual


 
OM-493 Page 23
7-5. Changing Engine Oil, Oil Filter, and Fuel Filter
Ref. ST-192 519-A / ST-802 210-B / ST-802 211 / S-0842
Y Stop engine and let cool.
1 Oil Drain Valve
2 1/2 ID x 12 in Hose
3 Oil Filter
Change engine oil and filter accord-
ing to engine owners manual.
Y Close valve and valve cap
before adding oil and
running engine.
Fill crankcase with new oil to full
mark on dipstick (see Section 7-2).
4 Fuel Filter
5 Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any spilled
fuel.
Start engine, and check for fuel
leaks.
Y Stop engine, tighten connec-
tions as necessary, and wipe
up fuel.
4
5
1
2
Tools Needed:
3
Full