Filter
Top Products
Wear Cylinders
Using a 4mm allen wrench, turn each of the 4 setscrews (4) clockwise until the nylatron wear
cylinders (5) are in slight contact with the column.
Side Cleaning Plates
Loosen each of the 4 cleaning plate capscrews (6) using a 3mm allen wrench and slide the
cleaning plate (7) so it is in contact with the column wear plates. Tighten the capscrews.
17. Spare Parts
Stocking Spare Parts
In order to gain maximum usage of your drill stand, it is necessary to ensure that an on-site
stock of the most important spare parts and those parts subject to wear are always ready and
on-hand.
The fitting and/or use of spare parts that we have not supplied or authorized may change the
technical configuration of the drill stand; thus impairing active and/or passive operational
safety. The manufacturer accepts no liability for damage due to the use of non-original spare
parts.
Ordering Spare Parts
The following spare parts lists with diagrams are designed to assist you when ordering spare
parts. When ordering spare parts, have the model number and part number ready.
6
5
7
5
4
4
5
6
7
126