Filter
Top Products
·Competent staff (qualifications, age, training) who have read and understood the
manual in detail before starting work: any electrical, mechanical or other problem should
be investigated by a qualified maintenance engineer (electrician, maintenance manager,
approved dealer, etc).
·That the warnings and instructions marked on the machine are followed (adequate
personal protection, correct use, general safety instructions, etc).
·That no modification, transformation or addition is detrimental to safety and that it is
carried out without prior authorization from the manufacturer.
MOTORS:
DIMAS: DM 225D with motor support collar WEKA: DK 12 with motor support collar
DM 225 with motor support collar DK 13 with motor support collar
DK 14 with motor support collar
CARDI: Talpa T0 with motor support collar
Talpa T1 with motor support collar
Motor characteristics: see the manufacturer’s manual supplied with the motor.
Please contact us regarding any other frame/motor combination.
1. Delivery
On delivery, carry out an immediate visual check for signs of physical damage and that no
components are missing.
The contents of the package should include:
Drill Stand - Base, Column, Carriage, Crank, Wheel Assembly, Vacuum Cap Plate, Vacuum
Gasket and Back Support, Operating Instructions and Ordered Accessories.
2. Technical Specifications
Base length 15.50 in / 394 mm
Base width 9.50 in / 241 mm
Height 32 in / 813 mm
Weight 30 lbs / 14 kg
Motor rating up to max. 3.5 hp / 2.4 kW
Drill bit diameter up to max. 6 in / 152 mm
Impact anchor; minimum tensile force 5.7 kN with M12 Fastener
118